20341 - SCTE Broadband August2019 COMPLETE highres v3

93 Vol. 41 No. 3 - August 2019 Issue products features less than 2% steepness, filtering intermodulation products without sacrificing valuable spectrum. “The filter starts at 550MHz and only requires 10MHz to reach more than 17dB isolation. The attenuation in the pass band is less than 1dB. The LPF-550-B filter has been deployed in hub locations where data and VOD have been added to the broadcast spectrum. The cable modems measure an average CINR improvement of 1.5dB. This improvement decreases the risk that customers will face a degraded service and increases capacity to use higher QAM modulation schemes,” concluded Technetix. * otherwise known as a Brick Wall Filter. For more information, see www.technetix.com As fibre optic access networks begin to proliferate, more operating companies are deploying optical fibre cable in various configurations to the last mile. Key technology requirements in fibre optic cable designs are being identified to lower the average build cost per subscriber. “Speed of deployment, cost of right-of-way access, logistics cost and installation time all have an impact on the overall cost to build an optical fibre network. In most cases, system designers will use traditional OSP cable designs that utilise loose tube cable designs, but these provide limiting fibre density for designs >432 fibre. Our new ultra-high-density fibre optic cables, Wrapping Tube Cable (WTC), utilise a new ‘intermittently bonded’ optical fibre ribbon technology called SpiderWeb Ribbon (SWR®). Cables contain a dry core (no grease/filling compounds) and are available up to 3,456 fibres,” explained Fujikura. “Using SWR, it is possible to mass fusion splice 12 fibres simultaneously (or, alternatively, individual fibres) and is particularly suitable for mid-span access applications. WTC/ SWR solutions provide significantly increased fibre packaging density, reduced diameter and provide a positive impact for future FTTx network builds by lowering the total system cost.” An increasing number of European operating companies are benefiting from the use of ultra-high density fibre WTC/SWR cables to significantly improve installation speed and duct space utilisation, pointed out the manufacturer. “For example; a 432 fibre WTC/SWR cable can be spliced and jointed within four-five hours, compared to 20+ hours for traditional loose tube technologies (75% faster) which provides significant Total Cost of Ownership (TCO) benefits,” it added. Ultra-density fibre For more information, see www.fujikura.com

RkJQdWJsaXNoZXIy OTIxNzg=